Waterproofing composite self adhesive membrane Larix 2.0mm S
The bituminous LARIX SELF-ADHESIVE membranes are the arrival point of the latest generation of membranes denominated “composite”. These membranes are so defined because thanks to new manufacturing technologies it is possible to produce materials with differentiated waterproofing mass, which allow the optimal utilization of each components properties, satisfying the different requirements. The production process avails itself of three different compound types, manufactured in separate dissolvers and sent to the respective areas of application on the production line. The first session allows the impregnation of the reinforcement which is a continuous single strand polyester using a particular compound suitable in saturating all its porosities, providing compatibility and promoting the elasticity or plasticity properties of the different applied compounds be they on the top or bottom surface. During the second session a different compound is applied on the top surface depending on the destination of use of the membrane. During the third session a particular compound with excellent self adhesive properties is applied on the lower surface, the thickness of which is calibrated. The LARIX SELF-ADHESIVE membranes are capable of resolving specific application and functional requirements and present numerous and important advantages, such as ease of application with consequential savings on time and the possibility to apply the material on surfaces which are not suitable to open flame. Therefore LARIX SELF-ADHESIVE is insuperable in the waterproofing of wood structures, insulation panels which are heat sensitive, panel decks and refurbishment of historical roofs. Furthermore LARIX SELF-ADHESIVE can be used and allows the waterproofing of particular roof details (ex. bandaging of plastic tubes, etc.) and the possibility to also apply with the traditional application method of open flame or hot air, obtaining an exceptional level of adhesion. LARIX SELF-ADHESIVE guarantees a perfect level of adhesion to the application surface, providing the system with an excellent level of wind uplift resistance and allowing accidental infiltrations to be traced. LARIX SELF-ADHESIVE has a continuous single strand composite woven non woven polyester reinforcement with high mechanical characteristics. The lower face of LARIX SELF-ADHESIVE is protected with a removable silicon release film. The upper face is protected with a polyethylene film or sand.
Fields of use
LARIX SELF-ADHESIVE with its innovative characteristics is indicated to waterproof a wide range of works, both civil and industrial. LARIX SELFADHESIVE shows its peculiarity in those applications where it is not suggestible to use open flame, for example on heat sensitive insulation panels (polystyrene), wooden roofs, metal decks and for all under roof shingle applications.
1m x 2.0mm x 20m/roll